Superior Cationic Polyacrylamide Flocculant (CPAM)

1.high dewatering rate, low dosage, can greatly reduce the cost 2.water solubility can dissolved in water with any proportion

Cationic Polyacrylamide

(CPAM)

 TS/C8510

CAS No: 9003-05-8

 

Introduction:

This product is water soluble polymers or polyelectrolytes. Because of its molecular chain containing a certain amount of polar groups, it can absorb water through a suspension of solid particles, make the particles or through the charge that bridge and condensed the particles formed floc properties. So, it can accelerate suspension of the particle settlement, have obvious to speed up the solution to clarify, promote filtering and other effects.

Application:

It is mainly used for the sludge dewatering, and can decrease the water content in sludge.It can also be used in the industrial wastewater and domestic sewage treatment.It can be used for papermaking to improve dry and wet strength of paper, increase the retaining of tiny fibers and fillings.

Product Name	Description	Batch   No.	Apperance	Molecular Weight               ( Million )	Solid Content         ( % )	Anionic Charge(%)	Cationic Charge(%)	Viscocity(mpa.s)	PH Value     (1% solution)	Dissolved Time(h)
TS/A6100	APAM	/	white grain powder	appr.14	≥90	appr.10-15	/		7.0~10.0	≤1.5
TS/A6200	APAM	/	white grain powder	appr.16	≥90	appr.25-30	/	appr.11	7.0~10.0	≤1.5
TS/A6300	APAM	/	white grain powder	appr.18	≥90	appr.35	/	appr.12.5	7.0~10.0	≤1.5
TS/N8700	NPAM	/	white grain powder	appr.9	≥90	appr.3	/		6.0~8.0	≤1.5
TS/N8710	NPAM	/	white grain powder	appr.12	≥90	appr.3-5	/		6.0~8.0	≤1.5
TS/C8505	CPAM	/	white grain powder	appr.8-12	≥90	/	appr 5	appr.1000	3.0~7.0	≤1.5
TS/C8510	CPAM	/	white grain powder		≥90	/	appr 10	appr.1000	3.0~7.0	≤1.5
TS/C8515	CPAM	/	white grain powder		≥90	/	appr 15	appr.900	3.0~7.0	≤1.5
TS/C8520	CPAM	/	white grain powder		≥90	/	≥appr.20	appr.900	3.0~7.0	≤1.5
TS/C8525	CPAM	/	white grain powder		≥90	/	≥appr.25	appr.901	3.0~7.1	≤1.6
TS/C8530	CPAM	/	white grain powder		≥90	/	≥appr.30	appr.902	3.0~7.2	≤1.7
TS/C8540	CPAM	/	white grain powder		≥90	/	≥appr.40	appr.903	3.0~7.3	≤1.8
TS/C8550	CPAM	/	white grain powder		≥90	/	≥appr.50	appr.904	3.0~7.4	≤1.9

Application Method & Notes:

It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).The most economical dosage can be determined based by a preliminary test.The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg. The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200kg.This product is hyqroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.

Superior Cationic Polyacrylamide Flocculant (CPAM)